Overview
The Smart Fill 5000 is Compact, Transportable and offers quick and easy preparation of up to 10 litres dissolution media in less than 15 minutes. In a single pass the media for dissolution tests can be precisely heated, degassed and filled gravimetrically into vessels. Foaming media like SDS (Sodium Dodecyl Sulphate) can also be used.
Integrated Dosing port . Optional Remote Filling Hand to fill the media Directly into the Dissolution Tester Vessel using Dedicated Switch FLUSH,START,STOP, WASH
Key Highlights
Smart Design
Microprocessor Controlled Touch Screen Display with Easy to use Interface allows User to Program all Important Function like Heating ,Vaccum Degassing.
Smart Sensor
Will detect the jars and Only Dispense Media only if Jar is placed in Position of Dispense.
In Line Heating
It Helps Avoid Time Delays associated with Convectional heating Method.The System is ready to prepare Media immediately upon on power up.
Designed to use with surfactants and handle frothing
Piston Controlled Vacuum Chamber
for Highly Effective De-aeration and Precise Media Volume.
Variable Dispense Volumes
Variable Dispense Volumes of 200ml to 1000ml.
Dispensing Method
Volumetric and Gravimetric.
Validation and calibration
Inbuilt for temperature and volume.
Quick Documentation
Quick Documentation Via Mobile Thermal Printer
SPECIFICATION
Product : Smartfill 5000
Function : Heating and Vacuum Degassing
Pharmacopeia Conformance : USP,EP
Control : Smart Touch Panel 7"
Time Needed for Degassing : 1000ml in less than 110 sec.
Dispensing Volume : 200 ml to 1000 ml to 200g to 1000g.
Dispensing time: 1000ml in less than 110 sec at 41°C in ambient temperature .
Heating Capacity: Up to +20°C deg. increase from Ambient Temperature to Max of up to 45°C
Input Filter : 25 mm in-line filter holder
Dispensing Accuracy : ±1% of set volume, but not less than ±5 ml
Degassing : Up to a maximum of 3.0 ppm, to a level of not less than 5.0 ppm
Temperature Control : Cartridge Heater
Temperature Accuracy : ± 2°C
PC Interface : RS-232 (serial) & Thermal Printer
Height : 32.28" (82 cm)
Width : 15" (38 cm)
Depth : 17.32" (44 cm)
Weight : 37.0Kg
Electrical Power : 220V ± 15V 50Hz 8Amps
Operatng voltage pre-set at factory
PARTS & ACCESSORIES
Replacement Tubing Kit. Includes 7.5 Feet of 1/4 Inch Polyethylene (Part No : QMD20001)
Tubing and 1.5 Feet of 1/4 Inch Viton Tubin (Part No : QMD20002)
Main Overlay (Part No : QMD20003)
Dispensing Tip (Part No : QMD20004)
1/4 Inch NPT Thread Insert Connected to Dispensing Tip (Part No : QMD20005)
Dispensing Tip (Part No : QMD20006)
Wash Tubing Assembly (Part No : QMD20007)
Filter Holder (Part No : QMD20008)
DC Motor and Wiring Assembly (Part No : QMD20009)
FEP Encapsulated O-Ring for Piston (Part No : QMD20010)
Heater and Thermocouple Including Wiring Assembly (Part No : QMD20011)
Temperature Sensor Including Wiring Assembly (Part No : QMD20012)
Encoder and Limit Switch Including Wiring Assembly (Part No : QMD20013)
Upper and Lower Solenoid Valve (Part No : QMD20014)
Upper Solenoid Valve (Part No : QMD20015).
Drive Belt (Part No : QMD20016)
Remote Dispensing Nozzle. Includes Remote Dispensing Unit, Hose and Control Cable (Part No : QMD20017)
Hose and Control Cable (Part No : QMD20018)
Mobile Cart (Trolley ) (Part No : QMD20019)
Downloads Product catalogue
Dissolution Media Degasser
The Smart Fill 5000 is Compact, Transportable and offers quick and easy preparation of up to 10 litres dissolution media in less than 15 minutes.
Download Now